NCR 7780 Overview

• Straight-line, open track provides increased reliability, and helps operators find and remove jammed documents. Fiber-optic sensors and quick-release mechanisms facilitate jam recovery.
• Thermal encoder prints 16 character amount fields at 100 documents per minute (dpm). The optional high-speed module uses impact technology to encode at 400 dpm.
• Programmable endorser prints fully programmable audit trail. Dual line rear endorser prints up to 235 dpm. Can print standard-sized, expanded, or compressed characters. Optional single line front endorser prints one line of standard characters at up to 225 dpm.
• The optional high-speed, ink-jet endorser (front and rear) can be programmed to print up to four lines of standard characters or simulated endorsements and bank stamps at up to 500 dpm.
• Rotary stamps available in rear only or front-and-rear configuration.
• Pockets are sequential, acoustically dampened, and hold 250 to 300 documents. Can expand up to 40 pockets (in 4-pocket increments)
• Three image capture options are available: upstream where reading occurs; downstream after encoding and endorsing; or both.

 NCR 7780 AVAILABLE CONFIGURATIONS

In addition to the 300 or 500 dpm models, several available configurations make the 7780 one of the most versatile transports available on the market. The NCR 7780 can be ordered in a "sit-down" or a "stand-up" (5 inches higher) configuration, which places the work area at the optimal height for the operator.

Choice of Features

• Document Feeder Module
  
  Automatic document feeder: holds up to 1,200 documents, 4.75 in. to 8.88 in. long; straight-line document feeding provides reliable performance.
  
  Hand-drop: independent track, lets operator hand-feed control documents while auto-feeding associated stacks.
  
  Optional merge hopper: injects control documents into the track as required by the application.
  
  Optional "higher-performance hopper": has up to 2500 document capacity and even fewer transport interrupts.
  
  
• Reader Module
  
  MICR reader: reads one line of MICR characters (E-13B or CMC 7 font).
  
  OCR reader (optional): reads one line of OCR characters, ten different fonts (up to three per document).
  
  Code line display camera (optional): captures video image of code line only, for correcting characters on screen or enhancing MICR reader accuracy.
  
  
• Image Module
  
  Provides same MICR capability as reader module, with enhanced OCR capability (1 to 3 lines) as an option. Imaging hardware captures, digitizes, compresses and transmits document images (front image only, or front and rear).
  
  
• High-Speed Programmable Endorser
  
  Fast, quiet, ink-jet printer prints up to 500 documents per minute; 1 to 4 lines of standard-sized characters or 1 to 2 lines of double-sized; uses graphics characters to emulate impact or roll-on stamps, eliminating the need to switch plates for different applications. Choose rear-printing only, or rear and front.
  
  
• Pocket Modules
  
  Each pocket module contains four pockets, typically holding over 300 documents each. Optional lister printers can be provided for each pocket. Each 7780 can have up to ten pocket modules (forty pockets). A switch on each module lets operators start and stop the transport without walking back to the keyboard.